|
Each site description-FPC Pre Bonder mechanism
|
| FPC positioning |
Tool external form indentation on the adjusted. |
| FPC Adjusting counterpoint mechanism |
FPC is the positioning of the FPC attraction tool positioning indentation do, then sucking fixed. After reaching the preset vacuum value, auto flip TAB attraction tool to mark the bit for bit in FPC suction part fine-tuning means XYθ axis adjustment to fine-tune the monitor in doing PANEL FPC alignment with the mark on bit confirmation. |
| Pre Bonder mechanism |
Pressure head Pre bonder is used CONSTANT HEAT mode, CYLINDER rise / fall by differential pressure Precision pressure regulating valve control Pre bonder seat with automatic reversing mechanism. |
| 4.2.4 CCD adjustment mechanism |
PANEL attraction in gaps between the top STAGE is equipped with two CCD CAMERA and side light. There can be adjusted in CAMERA X.Y.Z adjustment shaft, use it to adjust the position of the bit in the middle of the MARK of MONITOR. (Also under para institutions need additional up by the side of a light source) |
| 4.2.5 Pre Bonder pressure head |
SIZE W1.0~2.0L70(mm) |
| 4.2.6 Pre Bonder head material |
SKD11 |
| 4.2.7 Heater |
240V 250W*1 PCS/TOOL |
| 4.2.8 Axis microscope |
The distance between the mark alignment 11 ~ 70mm) |
| 4.2.9 CCD |
Color CCD |
| Cushioning material mechanism |
Automatic curling |
| PANEL |
Placed Panel automatically transfer to PANEL countertops, automatic positioning. |
| PANEL attraction |
Adsorption using Vacuum PUMP PANEL |
| PANEL positioning |
Positioning Block material using PEEK |